產品介紹
DVB Amplifiers
This AP3A in-line type low noise amplifier series is specifically designed for use in DVB-T reception systems to boost weak signals to increase reception capability.
| Item | AP3A -10 MA | AP3A -10 IEMR/EF |
| Impedance | 75 ohm | |
| Frequenct Range | 120 - 950MHz | 120 - 950MHz |
| Gain | 10dB (typ) | 10dB (typ) |
| Output Power (P1dB) | 0dBm (max) | 0dBm (max) |
| Return Loss | 10dB (typ) | 10dB (typ) |
| Noise Figure | 2.7dB (typ) | 2.7dB (typ) |
| Supply Voltage | DC 5V | DC 5V |
| Dimensions | 12.5(¢) x 41(L) mm | 11(¢) x25.4(W) x 38(L) mm |
| Net Weight | 17 g | 18 g |
* Specifications are subject to change without notice.
| Model | Pass Band | Connector 1 | Connector 2 | Image |
| AP3A -10 MA-U AP3A -10 MA |
UHF VHF+UHF |
F, Male | F, Female |  |
| AP3A -10 IEM/EF-U AP3A -10 IEM/EF |
UHF VHF+UHF |
IEC, Male | IEC, Female |  |
| AP3A -10 IEM/FF-U AP3A -10 IEM/FF |
UHF VHF+UHF |
IEC, Male | F, Female |  |
| AP3A -10 RMR-U AP3A -10 RMR |
UHF VHF+UHF |
F, Male | F, Female |  |
| AP3A -10 IEMR/FF-U AP3A -10 IEMR/FF |
UHF VHF+UHF |
IEC, Male | F, Female |  |
| AP3A -10 IEMR/EF-U AP3A -10 IEMR/EF |
UHF VHF+UHF |
IEC, Male | IEC, Female |  |