Sometimes CATV, MMDS or satellite reception system set-up need a power inserter.
The power inserter is only a small device in the system, but very important when it comes to signal quality.
Are you looking for a better power inserter ? Now, you get it.
The PI1-123 is a newly designed power inserter and has many features (see below).
1. Lowest insertion loss, singal-through-loss reduced to a minimum.
2. Better return loss and good impedance match avoid an increase in noise level and
reduce signal loss to keep the signal clean.
3. High isolation, rejects the signal passing through the power port or the power noise
passing through the signal port, avoid electromagnetic interference(EMI).
Item | PI1 - 123 | |
Impedance | 75 ohm | |
Frequency Range | 10 - 1000MHz | 1000 - 2300MHz |
Insertion Loss | 0.5dB (typ) / 1.0dB (max) | 1.0dB (typ) / 2.2dB (max) |
Return Loss | 20dB (typ) / 12dB (min) | 16dB (typ) / 12dB (min) |
Isolation | 60dB (typ) / 50dB (min) | 45dB (typ) / 30dB (min) |
Voltage Withstanding | DC 100V (max) | |
Current Passing | DC 1 A (max) | |
Dimensions | 18(H) x 54(W) x 45(D) mm | |
Net Weight | 46.5g |
* Specifications are subject to change without notice.