Power Inserters
PI1 series
  • PI1 series
  • Features :

     * Wide Band

    * High Isolation

    * Low Insertion Loss

    * Excellent Return Loss

    * Waterproof (alternative)

    * Suitable for CATV, MMDS, satellite
      and other communication systems

Sometimes CATV, MMDS or satellite reception system set-up need a power inserter.
The power inserter is only a small device in the system, but very important when it comes to signal quality.

Are you looking for a better power inserter ? Now, you get it.
The PI1-123 is a newly designed power inserter and has many features (see below).

1. Lowest insertion loss, singal-through-loss reduced to a minimum.

2. Better return loss and good impedance match avoid an increase in noise level and
    reduce signal loss to keep the signal clean.

3. High isolation, rejects the signal passing through the power port or the power noise
    passing through the signal port, avoid electromagnetic interference(EMI).  

  Item PI1 - 123
  Impedance 75 ohm
  Frequency Range 10 - 1000MHz 1000 - 2300MHz
  Insertion Loss 0.5dB (typ) / 1.0dB (max) 1.0dB (typ) / 2.2dB (max)
  Return Loss 20dB (typ) / 12dB (min) 16dB (typ) / 12dB (min)
  Isolation 60dB (typ) / 50dB (min) 45dB (typ) / 30dB (min)
  Voltage Withstanding DC 100V (max)
  Current Passing DC 1 A (max)
  Dimensions 18(H) x 54(W) x 45(D) mm
  Net Weight 46.5g

   * Specifications are subject to change without notice.